How To Install A Glass Block Wall

There are actually many different advantages one can have when it comes to the use of glass block walls. One of the best advantages is that they allow light to pass through thus giving you with more light inside your home.

Another one is that glass block walls provide you with a superb sense of privacy. This is obtained in a way that the glass blocks obscure views through your walls made of glass blocks. In addition, glass block walls also provide your rooms with opulent looks with a specific kind of material that is not commonly used in wall installation.

Aside from those things, glass block walls also give the impression that your home is something costly. So when you are looking forward to upgrading your home and have decided to make use of glass block walls then there is nothing to worry about when it comes to installing glass block walls.

The installation of glass block walls has become easier during these days. Thanks to the modern and advance technology, these walls have now become friendly to those people aiming to do the job of installing glass block walls on their own. When properly followed, these instructions below will help you come up with professional looking finish in just as short as one day.

1. The first step is to measure the horizontal areas where you are planning to install the glass block walls. It is very important to decide on the right kind of size you want to use right from the very start of your installation. After you have decided the size of the glass block to use, simply add half an inch to it for the joint of the mortar; divide it through the measurement of the wall which you’ve taken earlier. This will tell you how many blocks you will need for the entire span. Repeat procedures for the vertical areas.

2. Strengthen your flooring for the walls. Remember that glass blocks are heavy, thus requiring you to reinforce your flooring by giving it structural supports. If you can do it, you may want to test-fit the blocks first without the mortar joints yet. This will allow you to decide whether they are too heavy for your flooring. Check for the floor is relatively level to your wall.

3. Lay the anchor panel and mix the mortar until you’ve come up with dough with ideal consistency. Put about half an inch of the mortar on the first row making it accurately straight as possible. Wipe away excess mortar.

4. Place a T-shape spacer above the gap between the first and the second layer. Lay the next batch of mortar for the other layers to be done. The block’s shape and the spacers will determine their coherent levels.

5. Do the same procedures for the succeeding rows until you have completed them all. Inspect the areas that need more mortars. Allow a few hours to set them. Brush the mortar joints with sealants to protect them and allow them dry depending on the Installing Glass Block Walls instructions of the product.